Hệ Thống Quản Lý Tòa Nhà BMS

M9310 / VA9310 Series Electric Non-Spring Return Actuators 
The M9310/VA9310 Series Electric Non-Spring Return Actuators provide control of dampers in HVAC also control of valves with ISO Flange mounting such as VG1000 valve. All actuators in this series provide 88 lb·in (10 N·m) rated torque
Automatic Signal Input Detection, On/Off, Floating, and Proportional Control with Adjustable Span and Offset. 100,000 Cycles and 2.5 Million Repositions
Model Number : 
M9310-HGA-3, VA9310-HGA-3, VA9308,VA9310, VA9316, VA9320,VA9335

M9108 / M9116 Series Damper Actuators
Simple direct coupling reduces installation and commissioning time while improving reliability by eliminating damper linkages .Robust 70 lb-in (8 Nm / 16Nm) torque rating
On-off, floating and proportional control inputs meet the needs of most applications
Output position feedback provides simple closed-loop control with accurate position  sensing
Model Number : 
M9108-AGA-2 , M9108-AGC-2, M9108-AGD-2 , M9108-AGE-2 , M9108-GGA-2, M9108-GGC-2 , M9108-HGA-2, M9108-HGC-2 , M9108-JGA-2 , M9108-JGC-2 
M9116-AGA-2 , M9116-AGC-2, M9116-AGD-2 , M9116-AGE-2 , M9116-GGA-2, M9116-GGC-2 , M9116-HGA-2, M9116-HGC-2 , M9116-JGA-2 , M9116-JGC-2 
 

M9106 / M9109 Series Damper Actuators
Simple direct coupling reduces installation and commissioning time and improves reliability by eliminating damper linkages. Single screw coupling provides three-point shaft gripping
•   Designed for zone damper and ball valve actuator applications
•   Small, compact design — allows installation in tight-fitting locations
•   Rotation range adjustable 30 to 90 degrees CW or CCW
Model Number : 
M9106-AGA-2, M9106-AGC-2, M9106-AGF-2 , M9106-GGA-2, M9106-GGC-2 , M9106-IGA-2 , M9106-IGC-2, M9109-AGA-2 , M9109-AGC-2 , M9109-GGA-2, M9109-GGC-2

VA-7310 Electric Valve Actuator
The VA-7310 electric valve actuator is available with 3-point (floating), 3-point with feedback signal or proportional control. These actuators are available with 100 N and 150 N nominal force. They can be used in combination with the: VB-5040-S, VB-5030, VB-7040 and VG7000 series valves

Model Number : 
VA-7310, VA-7313, VA-7314, VA-7315, VA-7311, VA-7312

The VA-715x Series synchronous, motor-driven actuator provides incremental (three-wire), incremental with feedback, or proportional control of valves with up to 3/4 in. stroke in heating, ventilating, and air conditioning applications.
The VA-720x Series Electric Actuator provides incremental or proportional control of valves with up to a3/4 in. stroke in heating, ventilating, and air conditioning

Model Number : 

VA-7150-1001, VA-7153-1001, VA-7152-1001, VA-7200-1001, VA-7203-1001, VA-7202-1001, VA-7242-1001

The VA-7010 Series Electric On/Off Actuators provide two-position (open/closed) control and can easily be field mounted with a threaded coupling onto VG5000 Series Forged Brass Valves. Refer to the VG5000 Series Forged Brass Valves 1/2 Through 1 in., Two-Way Normally Closed and Three-Way.
The VA-7010 actuator features a manual operating lever (shown in Figure 3) for manually opening Normally Closed (N.C.) valves or the N.C. port of 3-way valves. The lever will not fully close Normally Open (N.O.) valves or the N.O. port of 3-way valves
Model Number : 
VA-7010-8001, VA-7010-8002, VA-7010-8003, VA-7010-8006, VA-7010-8007

VA-748x Electric Valve Actuators
VA-748x Series Electric Valve Actuators provide floating or proportional control in HVAC applications. The compact design of this actuator series makes it ideal for installations in confined locations, such as fan coil applications
The VA-748x Series Actuator is designed for field mounting onto the terminal unit valves 
made by Johnson Controls .
Model Number : 
VA-7480-0312, VA-7482-0312, VA-7482-8002-RA, VA-7482-9002-RA

VA-7700 Series Electric Valve Actuators
The VA-77xx Series synchronous motor driven actuator, for valves in heating, ventilation and air conditioning applications, is available for floating (3-point) control or proportional control 
with 0-10 V position feedback signal.
The actuator can be combined with VG7000, VG9000 and VGS8… valves
non spring return actuator has a 500 N nominal force and responds to a variety of input signals
Model Number : 
VA-7700-1001, VA-7700-1003, VA-7740-1001, VA-7740-1003, VA-7706-1001, VA-7746-1001

The RA-3000 series synchronous motor-driven reversible actuators are available for 3-point
(floating) or with electric positioner for 0…10 V control. They feature factory calibrated pressure
switches to provide specified close-off ratings. These actuators are available in three sizes with
1600 N, 1800 N and with 3000 N nominal force and can be used with JC flanged valves according to maximum close-off pressure ratings specified

Model Number : 
FA3341-7416
 

The FA-3300 series synchronous motor-driven, reversible, heavy duty actuators are available for 3-point (floating) or with electric positioner for 0… 10 V or 0… 20 mA control. They feature factory calibrated pressure switches to provide specified close-off ratings.
These actuators are available with 6000 N nominal force and can be used in combination
with VG8000 and VBD series valves in accordance with the maximum close-off pressure
ratings specified
Model Number : 
FA3341-7416

FA-2000 Spring Return Valve Actuator The FA-2000 series electric actuators are  available for 3-point control or with electronic positioner for 0…10 V or 0…20 mA control. It provides a fully variable valve aperture, a power failure spring return safety mechanism and an electrically operated manual override.
Models for 3-point and proportional 0…10 V or 0…20 mA control
The FA-22 and FA-25 electric spring return actuator models are to be used with the VBB, VBD and VG8000 valve series
Model Number : 
FA2241, FA2341, FA2441, FA25xx, FA26xx, FA27xx

Electric Actuator VAP Series 600N, 1000N, 3000N 
The VAP series BLDC motor-driven actuators are available for proportional control or 3-point (floating) control. They feature stroke calibration and manual operating which are user friendly to job sites. In combination with VGA7000, VGA8000 or VPMA series valves, they provide specified close-off pressure according to the application requests
Proportional control, floating control mode selectable, Multiple input and feedback signal selectable
Model Number : 
VAP600 , VAP1000 , VAP3000

VGA8000 Series Flanged Globe Valve PN16
1: DN15 to DN250 available
2: Kvs 0.63 to 700 m3 /h
3: High-grade ductile iron QT450-10 for valve body
4: Standard flange connection of ISO7005-2
5: Fitted with VAP-B, VAF series actuator with various △P available for different applications
Model Number: 
VGA8201xx, VGA8803xx , VGA8903xx

VGA7000 Series Threaded Globe Valve
1: DN15 to DN50 available
2: Kvs 0.63 to 40m3 /h
3: High-grade Stainless Steel for Valve body and stem
4: Standard flange connection of ISO7-1
5: Fitted with VAP-B, VAF series actuator with various △P available for different applications
Model Number : 
VGA7201, VGA7803

VG8000N DN15...150, PN16 Flanged Control Valves
These electrically and pneumatically operated flanged valves are primarily designed to regulate the flow of water and steam in response to the demand of a controller, in heating, ventilating and air conditioning systems. 
2-way PDTC (normally open),  
3-way mixing and 3-way diverting configurations
 Fluid temperature 0...180 °C , with Glycerine cup -10...180 °C
Model Number : 
VG82AxxxN, VG88AxxxN, VG89xxxxN, VG7000-1007

The VG7000 Series electrically and pneumatically operated bronze valves with female threaded
connection are designed primarily to regulate the flow of water and steam in response to the demand of a controller, in heating, ventilating, and air conditioning systems. These valves are available in normally open (N.O.) “push down to close”, (N.C.) “push down to open”, and three way mixing configurations. Both electric and pneumatic actuators are available
DN15, DN20, DN25, DN32, DN40, DN50
Model Number : 
VG7000-1013, VG7000-1014, VG7000-1001, VG7000-1007