Bộ Điều Khiển Kỹ Thuật Số DDC

The DX-9100 Extended Digital Controller is the ideal digital control solution for multiple 
chiller or boiler plant applications, air handling units, or distributed lighting control. As a standalone controller, the DX-9100 provides a real-time clock, extendable I/O, and graphic software programming to target a variety of applications. Individual point monitoring and control is available through the front panel LED displaysequences
Model Number :
DX-9100-8454 , DT-9100-8104 

The controller has 17 physical inputs and outputs and supports a wide range of temperature sensors and actuating devices. Active sensors for the measurement of humidity, pressure, and other variables are also supported. The FX07 also includes an onboard real-time clock to support the start-stop scheduling of equipment and real-time based control 
sequences.

Model Number :
LP-FX07D00-000C , LP-FX07D01-000C 

The Facility Explorer FX06 Field Controller offers a powerful and flexible solution for a wide variety of HVAC and refrigeration control requirements. The FX06 is designed to provide direct, closed loop control over mechanical HVAC or refrigeration equipment, either as a standalone device or as a part of a larger
Model Number :
LP-FX06P01-000C , LP-FX06P02-000C, LP-FX06P03-000C

The Facility Explorer FX05 Field Controller offers a powerful and flexible solution for a wide variety of HVAC and refrigeration control requirements. The FX05 is designed to provide direct, closed loop control over mechanical HVAC or refrigeration equipment, either as a standalone
Model Number :
LP-FX05P11-002C, LP-FX05N11-002C, LP-FX05N12-002C, LP-FX05P13-002C

The FX03 is a Configurable Terminal Unit Controller in the Facility Explorer range of products.
The controller is designed specifically to provide direct digital control of terminal unit applications with heating and/or cooling coils, an electric heater and a 3-speed or variable speed fan
Model Number :
LP-FX03A01-000C, LP-FX03A11-000C

The FX16 has 27 physical inputs and outputs and supports a wide range of temperature sensors and actuator devices. Up to 64 additional physical inputs and outputs can be added using XT/XP expansion modules. The FX16 can manage a distributed control application with up to 16 slave FX controllers (FX05, FX06, FX07, FX14, or FX15)
Model Number :
LP-FX16D01-000C, LP-FX16D11-000C 

The Facility Explorer FX15 Field Controller offers a powerful and flexible solution for a wide variety of HVAC and refrigeration control requirements. The FX15 is designed to provide direct, closed loop control over mechanical HVAC or refrigeration equipment, either as a standalone device or as a part of a larger, networked control system
Model Number :
LP-FX15D10-000C, LP-FX15D11-000C, LP-FX15D60-000C, LP-FX15D61-000C, LP-FX15D20-000C, LP-FX15D21-000C, LP-FX15D71-000C, LP-FX15D72-000C

The Advanced Application Field Equipment Controller (FAC) Series Controllers are programmable controllers that can communicate using BACnet/IP, MS/TP, or N2 communications protocols, depending on the model. The FAC4911 is a BACnet Advanced Application Controller (B-AAC) that communicates using BACnet/IP communications protocol. All other FAC Series controllers can be switched between MS/TP and N2 communication protocols. FAC controllers used as MS/TP devices are B-AACs with integral RS-485 MS/TP communications
Model Number :
MS-FAC2513-0, MS-FAC2611-0, MS-FAC2612-1, MS-FAC2612-2, MS-FAC3611-0, MS-FAC3613-0, MS-FAC4911-0.

The Field Equipment Controller (FEC) Series products are programmable controllers that can
be switched between BACnet MS/TP and N2 communications protocols. When they are used as BACnet MS/TP devices, they are BACnet Application Specific Controllers (B-ASCs) with integral MS/TP communications. In N2 mode, they can be used to modernize sites with legacy Johnson Controls
Model Number: MS-FEC1611-1, MS-FEC1621-1, MS-FEC2511-0, MS-FEC2611-0, MS-FEC2621-0

The CW (Wi-Fi) Controller Series is based on the very latest standards for IT networks and security and works with Wi-Fi b/g/ n. These controllers can be used as part of an existing building automation system or as a standalone WLAN GA network. The integrated Ethernet switch can be used for Daisy Chain wiring within recommended IT guidelines. Standard protocols such as BACnet, Modbus, MQTT, and SOX are supported. The CW Series includes an SQL database and RESTful API for additional data integration and multi-system interoperability. HTML5 dashboard, a suite of applications, kits and multi- functional adapter 
widgets are also integrated.
Model Number :
EasyIO-FW-28, EasyIO-FW-14, EasyIO-FW-08, CW-0404, CW-0806, CW-1612

The FX-PC Family Controllers and network sensors communicate using the standard BACnet protocol. The BACnet protocol is a standard for ANSI, ASHRAE, and the International Standards Organization (ISO) for building controls. PCG and PCV devices are BTL-listed as BACnet Application Specific Controllers (B-ASCs). 
The PCA controllers are BTL- listed as BACnet Advanced Application Controllers (B-
AACs). The NS Series Sensors are BTL-listed as BACnet Smart Sensors (B-SSs).
Model Number :
CH-PCA2513-0, FX-PCA2611-0, FX-PCA2612-1, FX-PCA2612-2, FX-PCA3613-0, FX-PCA4911-0, FX-PCG1611-1, FX-PCG1621-1, FX-PCG2611-0, FX-PCG2621-0

The CG series general purpose application controllers are well-suited for controlling a wide variety of facility and HVAC equipment, including fan coils, air handling units, packaged HVAC equipment, and central plant equipment. CG series controllers run pre-engineered and user-programmed Applications
F4-CGM models: BACnet MS/TP; N2. Zigbee wireless also supported (at FC Bus and for Sensors) with additional hardware. F4-CGE models: BACnet/IP
Model Number :
F4-CGM09090-0 , F4-CGM04060-0, F4-CGE09090-0 , F4-CGE04060-0 , F4-CGM09090-0H, F4-CGE09090-0H